IEF-G9010 Series User Manual
38
a.
Click [Settings] next to a protocol, and select one of the following:
i.
Any
: Specify all available commands or function access in this protocol.
ii.
Basic
: Select multiple commands from the following:
Read Only:
Read commands sent from HMI (Human-Machine Interface) / EWS (Engineering
Work Station) / SCADA (Supervisory Control and Data Acquisition) to PLC (Programmable Logic
Controller).
Read/Write:
Read and write commands sent from HMI/EWS/SCADA to PLC.
Admin Config:
Firmware update commands sent from EWS to PLC, Project update (i.e., PLC
code download) commands sent from EWS to PLC, and administration configuration relevant
commands from EWS to PLC.
Others:
Private commands, un-documented commands, or particular protocols provided by an
ICS vendor.
b.
(Optional) Configure advanced protocol settings. Refer to the following sections:
i.
Advanced Settings for the Modbus Protocol
ii.
Advanced Settings for the CIP Protocol
iii.
iv.
Advanced Settings for S7Comm Plus
v.
vi.
vii.
5.
Enable the Drop Malformed function. Refer to
Enabling the Drop Malformed Option for an ICS Protocol
6.
In the [General Protocol] section, select the protocol(s) you want to include in the protocol filter profile.
7.
Click
OK
.
