IEF-G9010 Series User Manual
66
2.
Click the
Add
button to add a new policy rule.
The [Create Policy Enforcement Rule] screen will appear.
3.
Configure the following settings:
a.
Status
: Click to toggle to enable or disable the rule.
b.
Rule Name
: Enter a name for the rule.
c.
(Optional)
Description
: Enter a description for the rule.
4.
In the [Direction Selection] section, configure the following settings:
a.
Select the network traffic direction between interface from the drop-down menu.
i.
Any
ii.
WAN to LAN
iii.
LAN to WAN
iv.
WAN to DMZ
v.
DMZ to WAN
vi.
LAN to DMZ
vii.
DMZ to LAN
viii.
LAN to LAN
NOTE
The network interfaces listed in the drop-down menu do not correspond with specific network interfaces on
the device. Instead, these refer to types of interfaces. For example, if you select [WAN to LAN], the policy
enforcement rule will apply to traffic from the WAN1 interface to the LAN1 interface or from the WAN1
interface to the LAN2 interface. If you select [LAN to LAN], then the policy enforcement rule will apply to
traffic from the LAN1 interface to the LAN2 interface or from the LAN2 interface to the LAN1 interface.
