Moving Terrain MT-VisionAir X ETSO Installation Manual Download Page 74

Page: 74 / 146

MTUX/IA-63-00 – Installation Manual

Date: 2017/02/17

9.7.1 Download of radar data for MT Satellite Radar (standard)

Prerequesites

Telephone connection is provided
Fast Integral GPS is connected -> UTC will be delivered

Procedure

(1) Turn unit on.
(2) Press key <RADAR> (MT Satellite Radar).
The RADAR screen is displayed.

Fig. 8.7.1: RADAR screen (initial)

Key

Function

M.LOAD

Manual Mode: Manual download of radar data.

Allows an immediate one time download of radar data,

e.g. at the beginning of the weather briefing.

SHOW / HIDE

Display of radar data previously downloaded /

Suppress radar layer for better legibility of the chart.

The key labels change depending on available func-

tion.

•
•

Summary of Contents for MT-VisionAir X ETSO



















































































































































Search results

Summary of Contents for MT-VisionAir X ETSO

Reviews:

Related manuals for MT-VisionAir X ETSO

Brands by name

Popular brands

Moving Terrain MT-VisionAir X ETSO, Installation Manual

Search results

Summary of Contents for MT-VisionAir X ETSO

Reviews:

Related manuals for MT-VisionAir X ETSO

Brands by name

Popular brands