Moving Terrain MT-VisionAir X ETSO Installation Manual Download Page 13

Page: 13 / 146

MTUX/IA-63-00 – Installation Manual

Date: 2017/02/17

1. General information for

Operating a MT-VisionAir X ETSO

MT-VisionAir X ETSO was designed to be installed and operated as a panel

mounted device, but can easily be removed for flight planning.

MT-VisionAir X ETSO is equally suited as a hand-held device

Fig. 1.1: MT-VisionAir X ETSO Panel mount installation in Piper JetProp

The Easy mount is permanently installed in the panel. The MT-VisionAir X

ETSO slides into the Easy mount, but can easily be removed for flight planning,

updates of the navigation data or charts, etc.

Installation of the the MT-VisionAir X ETSO has virtually no influence

on the weight and balance calculation.

Following installation, an EMI test has to be performed in the aircraft. Prior

to the first flight it is mandatory to turn on the system and check cockpit

instruments for deviations from normal performance.

Summary of Contents for MT-VisionAir X ETSO



















































































































































Search results

Summary of Contents for MT-VisionAir X ETSO

Reviews:

Related manuals for MT-VisionAir X ETSO

Brands by name

Popular brands

Moving Terrain MT-VisionAir X ETSO, Installation Manual

Search results

Summary of Contents for MT-VisionAir X ETSO

Reviews:

Related manuals for MT-VisionAir X ETSO

Brands by name

Popular brands