Moving Terrain MT-VisionAir X ETSO Installation Manual Download Page 109

Page: 109 / 146

MTUX/IA-63-00 – Installation Manual

109

Date: 2017/02/17

12.7 Installation advices for simultanous operation of

MT-Video-Input Device and MT-VGA-Output Device

If both devices are in use, one of it has to be connected to an USB port on the

rear side of the unit.

We recommend to connect the MT-Video-In Device to the rear USB on the left

side with the longer tunnel.

The Easy mount must be modified: a notch must be cut out to lead the USB

cable through. Please see pictures for the recommended placing which will

not effect the stability and functionality of the Easy Mount.

Easy mount with marked notch (front view total)

Summary of Contents for MT-VisionAir X ETSO



















































































































































Search results

Summary of Contents for MT-VisionAir X ETSO

Reviews:

Related manuals for MT-VisionAir X ETSO

Brands by name

Popular brands

Moving Terrain MT-VisionAir X ETSO, Installation Manual

Search results

Summary of Contents for MT-VisionAir X ETSO

Reviews:

Related manuals for MT-VisionAir X ETSO

Brands by name

Popular brands