manualshive.com logo in svg

Moving Terrain MT-VisionAir X ETSO, Installation Manual

The Installation Manual for the Moving Terrain MT-VisionAir X ETSO is available for download, completely free. This comprehensive manual provides step-by-step instructions for effortlessly installing the product. Visit our website to download the user manual and unlock the full potential of your MT-VisionAir X ETSO experience.

Share
Download
background image

MTUX/IA-63-00 – Installation Manual 

4

  Date: 2017/02/17

Contents

1.  General information for 

Operating a MT-VisionAir X ETSO  ... 13

2.  Introduction of MT-VisionAir X ETSO ............................................ 14

2.1  Views of device .................................................................................14
2.2  Label Definition & Serial Number ....................................................16
2.3  Warning Sign for Cockpit .................................................................17

3.  Installation of MT-VisionAir X ETSO............................................... 18

3.1  Installation of Easy mount in the cockpit panel .............................18

3.1.1  Choosing the best location .............................................................18
3.1.2  Easy mount sketch .........................................................................18
3.1.3  Panel cutout ....................................................................................19
3.2.4  Dimensions of Easy mount .............................................................20
3.1.5  Dimensions of MT-VisionAir X ETSO with Easy mount ..................23
3.1.6  Remarks regarding installation .......................................................25
3.1.7  View of an installation in a cockpit ..................................................26
3.1.8  Removal and Insertion of the Device ..............................................26

3.2  Installation of the Easy mount in other locations ..........................27

4.  Installation of GPS ........................................................................... 29

4.1  Installation of Fast Integral GPS ......................................................29

4.1.1  Recommended installation location of the Fast Integral GPS ........29
4.1.2  View of Fast Integral GPS ..............................................................31
4.1.3  External dimensions of Fast Integral GPS ......................................32
4.1.4  Remarks regarding installation .......................................................33

4.3  Restrictions for Location of Fast Integral GPS and iridium 

antenna .......................................................................................................34

5.  Connections ..................................................................................... 35

5.1  Power supply  ....................................................................................35
5.2  Power supply via battery pack ........................................................36
5.3  General connection of MT-VisionAir X ETSO .................................37
5.4  Central connector (50-pin MDR) ......................................................38
5.5  Pin layout of the central connector (50-pin MDR) ..........................40
5.6  The central plug cable assembly for MT-VisionAir X ETSO ..........42

5.6.1. Recommended tools and materials ................................................42
5.6.2. The strain relief ...............................................................................42

Summary of Contents for MT-VisionAir X ETSO



















































































































































Reviews:

No comments

Related manuals for MT-VisionAir X ETSO

AEA Technology, Inc. E20/20 Operating Manual preview
E20/20
Brand: AEA Technology, Inc. Pages: 126
Garmin GPSMAP 400 series Owner'S Manual preview
GPSMAP 400 series
Brand: Garmin Pages: 72
Tecnodom VULCANO User And Maintenance Manual preview
VULCANO
Brand: Tecnodom Pages: 96
ViewSonic CDX5552 User Manual preview
CDX5552
Brand: ViewSonic Pages: 62
Garmin G500 Reference Manual preview
G500
Brand: Garmin Pages: 104
Garmin GIA 6300 Installation Information preview
GIA 6300
Brand: Garmin Pages: 14
Realfiction Dreamoc Diamond Content Manual preview
Dreamoc Diamond
Brand: Realfiction Pages: 8

Brands by name

Popular brands

Load more brands