Assembly Instructions
Flexi-News™ cross category
1.
2.
3.
4.
First, take base (
A
) and ensure brakes are
applied to the two castors that have them.
Braked castors are at opposite corners of
base.
With the base locked in place, drop the RH
panel (
C
) into the base (
A
) as shown above.
Next secure the RH panel (
C
) in place with
x4 thumb screws (
J
). Repeat steps 2 and
3 for the LH panel (
B
). Both LH and RH
panels should now be in place as in
Fig. i
5.
6.
Guide the slots on the sides of the shelf
onto the metal studs and push down until
the shelf ‘snaps’ into place.
Next place the insert panel (
D
) onto the
base as shown.
Take the first confectionery shelf (
E
) and locate
the slots on the sides onto the lowest set of metal
studs on the right hand panel of the existing display
and the insert panel (
D
).
Tel: 0113 244 5524 Fax: 0113 244 6664 email: [email protected] web: www.bartuf.com
All dimensions are approximate and may be subject to change.
All drawings and designs are protected by design right and copyright©
Patents GB 2293538B.GB 2317328 US 6,112,912
D
E
Flexi News™
cross cat.
tall twin
B001733
Flexi News™
cross cat.
quad
B001728
Flexi News™
cross cat.
twin
B001731
E
E
PUSH
DOWN
A
C
Fig. i
J
x1
x1
x1/2
x1/2
x8
x1
x1/2
x4/8
x1/2
x1/2
