manualshive.com logo in svg

MOTU PCI-424, User Manual, Page: 71 / 270

Share
Download
MOTU PCI-424 User Manual Download Page 71

I N S T A L L I N G   T H E   P C I - 4 2 4   H A R D W A R E

42

SAMPLE-ACCURATE TASCAM SYNC

This page shows how to set up sample-accurate 
locating (the most accurate synchronization 
possible) between a 2408mk3 interface and Tascam 
digital recorders. This setup requires a Digital 
Timepiece (or other MMC-compatible Tascam 
synchronizer). If you also have Alesis recorders, see 
page 40. If you have a DA-88/SY-88 or DA-98 and 
you want to operate in offset mode from the time 
code track, see “Syncing to a DA-88/98 time code 
track” on page 47.

PCI-424 card

ADAT Sync In 

USB cable (or other bi-

directional MIDI 

connection) bearing 

MMC transport 

commands from Cubase 

(or other ASIO 

software) to the Digital 

Timepiece (or other 

synchronizer)

Figure 4-22: Connections for sample-accurate sync between
one or more Tascam recorders and a 2408mk3 interface.

Tascam Decks

Sync In

Tascam

sync cables

Sync Out

Sync In

Sync Out

Sync In

Sync Out

etc.

Tascam 

Sync Out port

Digital Timepiece or any other 

MMC-compatible Tascam synchronizer

Set the Digital 
Timepiece 
sync mode to 

Internal.

ADAT

Sync out port

Optional ADAT 

sync chain 

(See page 40)

Windows computer running Cubase or 

other sample-accurate ASIO software

1. In the MOTU PCI Audio Console, choose 

PCI-424: ADAT 

from the 

Clock 

Source

 menu as shown to above.

2. Make sure the 

Sample Rate

 setting matches the other recorders.

Put Cubase into external sync mode.

See “Sample-accurate sync with Cubase or 
Nuendo” on page 80 for more information.

In Cubase VST, go to the Synchronization window and 
choose 

ASIO 2.0 MMC

 as the Timecode Base. In Cubase SX, 

go to the Synchronization Setup window and choose the 

ASIO Positioning Protocol

 and 

MIDI Machine Control

 options.

Use this setup if you have:

✓

Tascam DA-series digital tape decks or hard disk recorders.

✓

A Digital Timepiece or other Tascam synchronizer.

✓

Host software that supports sample-accurate sync.

This setup provides:

✓

Sample-accurate locating between all Tascam sync-compatible 
devices, the 2408mk3 and your software (Cubase or other sam-
ple-accurate software).

✓

If you also have ADATs, this setup provides sample-accurate 
locating across all devices: ADAT, Tascam and the 2408mk3.

✓

Transport control of everything from the computer, OR 
continuous sync to SMPTE time code and other sync sources 
(the other source is the transport master in this case).

Summary of Contents for PCI-424















































































































































































































































































Reviews:

No comments