manualshive.com logo in svg

MOTU PCI-424, User Manual, Page: 198 / 270

Share
Download
MOTU PCI-424 User Manual Download Page 198

I N S T A L L I N G   T H E   P C I - 4 2 4   M A C I N T O S H   S O F T W A R E

56

MOTU PCI SOUND MANAGER DRIVER

The MOTU PCI Sound Manager driver is placed 
by the software installer in the Extensions Folder of 
the System Folder on your Mac’s startup disk. This 
system extension allows the Apple Sound Manager 
to use the PCI-424 hardware for stereo input and 
output. In turn, any Sound Manager compatible 
software can also use the PCI-424 hardware for 
stereo input and output.

☛

Sound Manager only supports stereo input 

and output. Therefore, Sound Manager 
applications can only record and play through two 
inputs and outputs at a time.

For details about Sound Manager, see chapter 10, 
“Sound Manager” (page 97).

Figure 4-5: The MOTU PCI Sound Manager Driver.

CUEMIX CONSOLE

This program provides a mixing console that gives 
you control over the PCI-424 card’s no-latency 
CueMix DSP features. For details, see “CueMix 
DSP hardware monitoring” on page 108.

Summary of Contents for PCI-424















































































































































































































































































Reviews:

No comments