manualshive.com logo in svg

MOTU PCI-424, User Manual, Page: 141 / 270

Share
Download
MOTU PCI-424 User Manual Download Page 141

P E R F O R M A N C E   T I P S   &   T R O U B L E S H O O T I N G

112

can request a replacement disc by calling our 
business office at (617) 576-2760 and asking for the 
customer service department.

TECHNICAL SUPPORT

If you are unable, with your dealer’s help, to solve 
problems you encounter with the PCI-424 system, 
you may contact our technical support department 
in one of the following ways:

■

Tech support hotline: (617) 576-3066 (Monday 

through Friday, 9 am to 6 pm EST)

■

Tech support 24-hour fax line: (617) 354-3068

■

Tech support email: [email protected]

■

Web site: www.motu.com

Please provide the following information to help us 
solve your problem as quickly as possible:

■

The serial number of the PCI-424 system. This is 

printed on a sticker placed on the bottom of the 
rack-mount audio interface. You must be able to 
supply this number to receive technical support.

■

Software version numbers for the audio software 

you are using, the MOTU PCI WDM Audio Driver, 
PCI-424 ASIO driver, etc.

■

A brief explanation of the problem, including the 

exact sequence of actions which cause it, and the 
contents of any error messages which appear on the 
screen.

Summary of Contents for PCI-424















































































































































































































































































Reviews:

No comments