manualshive.com logo in svg

MOTU PCI-424, User Manual, Page: 240 / 270

Share
Download
MOTU PCI-424 User Manual Download Page 240

S O U N D   M A N A G E R

98

To install the PCI-424 Sound Manager driver:

1

Insert the PCI-424 installer CD into your 

Macintosh.

2

Run the PCI-424 software installer.

3

Enable (check) the MOTU PCI Sound Manager 

Driver option, along with any other packages you 
would like to install at this time.

4

Click Install.

5

Complete the installation as instructed by the 

installer. Because the MOTU PCI Sound Manager 
driver is a System Extension, the installer will ask 
you to restart the computer.

SOUND CONTROL PANEL IS REQUIRED

The 

Sound

 Control Panel allows you choose your 

PCI-424 audio interface as an output for Sound 
Manager.

Locating the Sound Control Panel

If the 

Sound

 Control Panel is not present in your 

Control Panels folder, use Sherlock (command-F) 
in the Finder to locate it.

If the Sound Control Panel can’t be found, insert 
the Mac OS Installer CD-ROM that shipped with 
your computer and try again, searching on the 
CD-ROM. It will probably be there.

Once you’ve located the Sound Control Panel, you 
can place it anywhere you like on your hard drive, 
as it operates like a standard application. Just 
double-click it to launch it.

INSTALLATION SUMMARY

Here is what you should have by now:

■

The 

MOTU PCI Sound Manager driver

 is 

installed as a System Extension.

■

The 

Sound

 Control panel is somewhere on your 

hard drive.

■

As part of the standard PCI-424 software 

installation, a copy of the 

MOTU PCI Audio 

Console

 application is now on your hard drive.

If all these things are true, you are ready to activate 
the PCI-424 hardware as your Sound Manager 
input source and output destination.

ENABLING INPUTS AND OUTPUTS 

Before you set up Sound Manager, you need to run 
the MOTU PCI Audio Console and enable the 
input pair and output pair you would like to use for 
Sound Manager.

1

Launch the MOTU PCI Audio Console.

2

Choose the desired sample rate.

3

From the 

Monitor Outputs

 menu, choose the 

desired output pair for Sound Manager as shown 
below in Figure 10-2. If the pair you want is not 
available in the menu, click the 

Enable Routing

 

check box and then click the 

Enable Output

 check 

box for the desired output pair.

Figure 10-2: In this example, analog outputs 1-2 on a 2408mk3 inter-
face will be used for Sound Manager output. 

The ‘Monitor Outputs’ setting determines which output pair Sound 
Manager will use. If the pair you want is not available in the menu, 
click the Enable Routing check box and then click the Enable Output 
check box for the desired output pair.

Check the output pair you want 
to use for Sound Manager.

Summary of Contents for PCI-424















































































































































































































































































Reviews:

No comments