MM64003a_e.doc / Feb-09
Page 18 / 44
5.
Keypad Operation
An overview of all parameters and explanations can be found under section 6.
The menu of the unit uses four keys, hereinafter named as follows:
PROG UP DOWN
ENTER
Key functions depend on the actual operating state of the unit. Essentially we have to describe
two basic states:
•
Normal operation
•
General setup procedure
5.1.
Normal Operation
In this mode the unit operates as a motion monitor according to the settings defined upon
setup. All front keys may have customer-defined functions according to the specifications met
in the keypad definition menu F08 (e.g. Reset, Display selection or else). During normal
operation the internal status "Ready" indicates the operating state of the unit.
5.2.
General Setup Procedure
The unit changes over from normal operation to setup level when keeping the
key down
for at least 2 seconds. Thereafter you can select one of the parameter groups F01 to F11.
Inside the group you can now select the desired parameter and set the value according to need.
After this you can either set more parameters or return to the normal operation.
During all setup operations by keypad the "Ready" status is OFF while the "Keypad Operation"
status is ON.
The adjoining sequence of key operations explains how to change
Parameter number 052 of group F06 from the original value of 0 to a new value of 8
P
«
Summary of Contents for MM 640
Page 15: ...MM64003a_e doc Feb 09 Page 15 44...
