MM64003a_e.doc / Feb-09
Page 11 / 44
3.2.
Available Setpoints
For configuration of the switching conditions of the relays, the following setpoints are
available. Every setting is individual for each of the four switching functions, i.e. there are
totally 4 x 7 = 28 programmable setpoints available. Settings can be omitted if the
corresponding setpoints have not been assigned to a switching function.
Setpoint
Description
Set Speed 1.1
Set Speed 1 for Encoder 1
Set Speed 1.2
Set Speed 2 for Encoder 1
Set Speed 2.1
Set Speed 1 for Encoder 2
Set Speed 2.2
Set Speed 2 for Encoder 2
Setpoint Counter 1
Position setpoint for Encoder 1
Setpoint Counter 2
Position setpoint for Encoder 2
Differential Setpoint Differential position setpoint (encoder 1 – encoder 2)
3.3.
Available Criteria for Combination of Switching Events
The monitor provides totally four different switching functions, each of them consisting of up to
four different switching events. If an event becomes true the monitor will set the corresponding
output according to the selected output assignment.
3.3.1.
Logical switching conditions
Event
Description of the Switching Condition
Login1 or /Login1
Login2 or /Login2
Login3 or /Login3
Login4 or /Login4
Login5 or /Login5
Login6 or /Login6
All functions allow gating with one or several of the 6 logical Inputs.
-
Login X means that a “HIGH” signal is needed to make the
condition true
-
/Login X means that a “LOW” signal is needed to make the
condition true
Summary of Contents for MM 640
Page 15: ...MM64003a_e doc Feb 09 Page 15 44...
