Motorola WT4090, Integrator Manual

Page: 164 / 206

9 - 2 WT4070/90 Wearable Terminal Integrator Guide
4.
Ensure that the Disable backlight if not used for checkbox is checked.
5.
In the drop-down list, select the amount of time after which the display will turn off. Set to 1 minute or a lower
value that the user is comfortable with.
To set the brightness level of the display:
1.
Select Brightness tab.
2.
Move the slider to 2 to conserve power.
3.
Select OK .
Keypad Light
To set the amount of time that the keypad light stays on:
1.
Select Start > Settings > Control Panel .
2.
Select Keylight icon.
3.
Select Battery Power tab.
4.
Ensure that the Disable keylight if not used for checkbox is checked.
5.
In the drop-down list, select the amount of time after which the keypad light will turn off. Set to 1 minute or a
lower value that the user is comfortable with.
To disable the key light from coming on:
1.
Select the Advanced tab.
2.
Ensure that the Disable keylight checkbox is checked.
Tap OK .
Power
To set the wearable computer to turn off after a short period of non-use:
1.
Select Start > Settings > Control Panel .
2.
Select Power icon.
3.
Select Power Off tab
4.
Ensure that the Turn off device if not used for checkbox is checked
5.
In the drop-down list, select the amount of time after which the device will turn off. The default setting is 3. If
desired, lower this value to 1 to conserve power.
To set the CPU to maximum performance:
1.
Select CPU Power tab.
2.
Ensure that the Max. Performance radio button is selected. This selection maximizes battery life.
3.
Select Apply .
NOTE
Changing the Keypad Backlight setting on the Voice Only WT4090 will change the brightness of the
WLAN Status LED. Refer to the EMDK Help file WT4090-VOW Programming page for more information.