5 - 34 WT4070/90 Wearable Terminal Integrator Guide
The
AP Networks
and
Ad-Hoc Networks
check boxes are selected by default. To select/de-select the checkboxes,
press
TAB
to highlight a checkbox. Press
Blue
-
BKSP
to select or de-select the checkbox.
Press
TAB
to highlight
Save
and then press
ENTER
to save the settings or press
ESC
to discard any changes.
Press
ESC
to exit the
Options
dialog box.
Regulatory Options
Use the
Regulatory
settings to configure the country the wearable terminal is in. Due to regulatory requirements
(within a country) a wearable terminal is only allowed to use certain channels.
Figure 5-44
Regulatory Options Dialog Box
1.
Press
TAB
to highlight the
Settings
drop-down menu. Use the scroll keys to select a country from the list.
2.
Press
TAB
to highlight the
Enable 802.11d
checkbox. Press
Blue
-
BKSP
to enable or disable the check box.
3.
Press
TAB
to highlight
Save
and then press
ENTER
to save the settings or press
ESC
to discard any changes.
4.
Press
ESC
to exit the
Options
dialog box.
Table 5-23
OP Mode Filtering Options
Field
Description
AP Networks
Select the
AP Networks
check box to display available AP networks and their signal
strength within the
Available WLAN Networks
(see
Find WLANs Application on page
4-5
). These are the APs available to the wearable terminal profile for association. If
this option was previously disabled, refresh the
Available WLAN Networks
window to
display the AP networks available to the wearable terminal.
AD-Hoc Networks
Select the
Ad-Hoc Networks
check box to display available peer (adapter) networks
and their signal strength within the
Available WLAN Networks
. These are peer
networks available to the wearable terminal profile for association. If this option was
previously disabled, refresh the
Available WLAN Networks
window to display the Ad
Hoc networks available to the wearable terminal.
Table 5-24
Regulatory Options
Field
Description
Settings
Select the country from the drop-down list. To connect to a profile, the profile country must
match this setting, or the AP country setting if you select the
Enable 802.11d
check box.
Enable 802.11d
If you enable this setting the WLAN adapter attempts to retrieve the country setting from
the APs. Profiles which use
Infrastructure
mode can only connect if this country setting is
the same as the AP country setting or if the profile country setting is set to
Allow Any
Country
. All APs must be configured to transmit the country information.
Summary of Contents for WT4090
