Motorola WT4090, Integrator Manual

Page: 121 / 206

Using Bluetooth 6 - 15
9.
Press ENTER . The wearable terminal connects to the remote device and begins to send the file. The Sending
Picture window appears. When the file transfer is complete a confirmation dialog appears. Press ENTER .
Figure 6-20
Sending Picture Window
Headset Services
To connect to a Bluetooth headset:
1.
In the Favorite window, use the navigation keys to select the headset service.
2.
Press MENU and select Connect from the pop-up menu.
3.
Press ENTER .
4.
The wearable terminal connects to the headset. Refer to your headset user manual for instruction on
communicating with a Bluetooth device.
Serial Port Services
Use the wireless Bluetooth serial port connection just as you would a physical serial cable connection. You must
configure the application that will use the connection to the correct serial port.
To establish a serial port connection:
1.
In the Favorite window, use the navigation keys to select the Serial Port service.
2.
Press MENU and select Connect from the pop-up menu.
3.
Press ENTER .
4.
The Remote Service Connection window appears.
NOTE
By default, COM ports COM4, COM5 and COM9 are Bluetooth virtual ports. If an application opens one of
these ports, the Bluetooth driver activates and guides you through a Bluetooth connection.