Event
Log
Messages
B-21
SURFboard Cable Modem Installation Manual
Miscellaneous
Code
Event Log Messages
Level
Cable Modem Actions
M500.0
Startup pipe cannot be retrieved
1 (Emerg)
When time out, the board will reset
M500.1
Startup pipe cannot be created
1 (Emerg)
When time out, the board will reset
M503.0
Unable to initialize HTTP Server, no
HTML supported
5 (Warn)
No action taken
M503.1
Unable to initialize UI, no HTML supported 5 (Warn)
No action taken
M504.0
Unable to create or start WDT. No
automate Reset supported
5 (Warn)
When Timeout, the board will reset
M505.0
Unable to create SnmpDelayReset task
5 (Warn)
M510.0
ReadFromFlash - flash Semaphore NULL,
cannot access flash
1 (Emerg)
M510.1
WriteToFlash - flash Semaphore NULL,
cannot access flash
1 (Emerg)
M550.0
Hash Table failed to allocate memory for
entries.
1 (Emerg)
Attempt was made to create a hash
table. System did not have enough
memory. Contact your vendor.
M550.1
Hash Table failed to allocate memory for
hash table.
1 (Emerg)
Attempt was made to create a hash
table. System did not have enough
memory. Contact your vendor.
M550.2
Hash Table failed to add entry. Hash Key
out of table range.
1 (Emerg)
System attempted to hash into a hash
table. Hash key that was calculated
was out of the table range. Contact
your vendor.
M550.3
Hash Table failed to delete entry. Hash
Key out of table range
1 (Emerg)
System attempted to hash into a hash
table. Hash key that was calculated
was out of the table range. Contact
your vendor.
M550.4
Hash Table failed to delete entry. Entry
not found
4 (Error)
An attempt was made to delete an
entry from a hash table and the entry
did not exist in the table.
M550.5
Hash Table can’t allocate memory to
resize table.
1 (Emerg)
An attempt was made to change the
size of a Hash Table. The system was
not able to allocate enough memory to
perform the operation. Contact your
vendor.
M550.6
Hash Table failed to resize table. Current
entries > new size.
4 (Error)
An attempt was made to decrease the
size of an existing hash table that has
more entries than the new size will
hold. If possible delete some of the
entries and try the operation again.
M551.0
***** REACHED MAX ENTRIES, LOG IS
WRAPPED *****
7 (Info)
No action taken
M552.0
Unable to set SMNPv3 my engine info
4 (Error)
No action taken SNMPv3 won’t work
M553.0
Unable to create SNMPv3 group
4 (Error)
No action taken SNMPv3 won’t work
M553.1
Unable to build or install group
4 (Error)
No action taken SNMPv3 won’t work
Summary of Contents for SB5100 - SURFboard - 38 Mbps Cable Modem
Page 100: ...501652 001 01 03 MGBI ...
