Motorola SB5100 - SURFboard - 38 Mbps Cable Modem Installation Manual Download

Page: 85 / 100

Event

Log

Messages

B-13

SURFboard Cable Modem Installation Manual

Code

Event Log Messages

Level

Cable Modem Actions

D538.0

TFTP - Invalid COS encoding type,
CONTINUE

4 (Error)

Log it and continue reading next
bytes of Config file.

D539.0

CM reset due to config value out of range

1 (Emerg)

Save all event logs to flash before
resetting

Filtering

Code

Event Log Messages

Level

Cable Modem Actions

F501.0

Bridge Hook. Init failed to get Ethernet
Interface Pointer

1 (Emerg)

The CM would not return a pointer to
Ethernet interface. Contact your
vendor.

F501.1

BridgeHook. Init failed to get HFC
Interface Pointer.

1 (Emerg)

The CM would not return a pointer to
Cable interface. Contact your
vendor.

F501.2

BridgeHook. Init failed to get Ethernet
MAC address.

1 (Emerg)

The CM would not return the
Ethernet MAC address. Contact
your vendor.

F501.3

BridgeHook. Init failed to get HFC MAC
address.

1 (Emerg)

The CM would not return the HFC
MAC address. Contact your vendor.

F501.4

BridgeHook. Init failed to get Ethernet IP
Address.

1 (Emerg)

The CM would not return the
Ethernet IP address. Contact your
vendor.

F502.1

Bridge Forwarding Enabled.

7 (Info)

Bridge Forwarding has been
enabled. No other action.

F502.2

Bridge Forwarding Disabled.

7 (Info)

Bridge Forwarding has been
disabled. No other action.

F502.3

Bridge Learning Enabled

7 (Info)

Bridge Learning has been enabled.
No other action.

F502.4

Bridge Learning Disabled

7 (Info)

Bridge Learning has been disabled.
No other action.

F502.5

Bridge MCNS BPDU Forwarding
Enabled

7 (Info)

DOCSIS BPDU forwarding has been
enabled. No other action.

F502.6

Bridge MCNS BPDU Forwarding
Disabled

7 (Info)

DOCSIS BPDU forwarding has been
disabled. No other action.

F504.1

Bridge Ethernet Hook. Failed to learn
CPE MAC Address

7 (Info)

Bridge failed to learn a CPE MAC
address for its filtering table. Table is
either full or corrupted. No other
action taken.

F504.2

Bridge Ethernet Hook. Failed to learn
Multicast Filter.

4 (Error)

Bridge failed to learn Multicast filter.
Table is either full or corrupted. No
other action taken by CM.

F506.0

Bridge Multicast Aging. Failed to start
WatchDog Timer.

5 (Warn)

Bridge couldn’t start timer for aging
multicast filters. Error at system
level. No other action taken.

Summary of Contents for SB5100 - SURFboard - 38 Mbps Cable Modem





































































































Search results

Summary of Contents for SB5100 - SURFboard - 38 Mbps Cable Modem

Reviews:

Related manuals for SB5100 - SURFboard - 38 Mbps Cable Modem

Brands by name

Popular brands

Motorola SB5100 - SURFboard - 38 Mbps Cable Modem, Installation Manual

Search results

Summary of Contents for SB5100 - SURFboard - 38 Mbps Cable Modem

Reviews:

Related manuals for SB5100 - SURFboard - 38 Mbps Cable Modem

Brands by name

Popular brands