Motorola SB5100 - SURFboard - 38 Mbps Cable Modem Installation Manual Download Page 87

Page: 87 / 100

Event

Log

Messages

B-15

SURFboard Cable Modem Installation Manual

Code

Event Log Messages

Level

Cable Modem Actions

F508.1

LLC Filters. Failed to add filter. Filter
already exists.

4 (Error)

SNMP tried to add an LLC filter that
already exists. Filter not added.
Error returned to SNMP.

F508.2

LLC Filters. Failed to add filter. Invalid
Protocol Type.

4 (Error)

SNMP tried to add an LLC filter with
an invalid protocol type. Filter not
added. Error returned to SNMP.

F508.3

LLC Filters. Failed to delete filter. Filter
not found.

4 (Error)

SNMP tried to delete an LLC filter
that does not exist. Nothing deleted.
Error returned to SNMP.

F508.4

LLC Filters. Failed to delete filter. Invalid
Protocol Type

4 (Error)

SNMP tried to delete a filter with an
invalid protocol type. Nothing
deleted. Error returned to SNMP.

F508.5

LLC Filters. Failed to return filter
matches. Filter not found.

4 (Error)

SNMP tried to read an LLC filter that
doesn’t exist in the table. Error
returned to SNMP.

F508.6

LLC Arp Storm Filtering. Failed to Enable
Filter. Already Enabled.

4 (Error)

An attempt was made to enable Arp
storm filtering when it was already
enabled. No action taken.

F508.7

LLC Arp Storm Filtering. Failed to start
WatchDog Timer

4 (Error )

CM was unable to start timer for
clearing ARP counters for ARP
Storm Filters. Contact your vendor.

F509.0

IP Filter Set Default Action failed. Invalid
action.

4 (Error )

SNMP tried to set
docsDevFilterIpDefault to an invalid
value. Default is not changed. Error
returned to SNMP.

F509.1

IP Filters. Failed to add IP Filter. Invalid
direction.

4 (Error )

SNMP tried to add an IP filter with
an invalid value for direction. Filter is
not added to filter table. Error
returned to SNMP.

F509.2

IP Filters. Failed to add IP Filter. Index
already exists.

4 (Error )

SNMP tried to add an IP filter with
an index of a filter that already
exists. Filter is not added to filter
table. Error returned to SNMP.

F509.3

IP Filters. Failed to add IP Filter. Inbound
filter table full.

4 (Error )

SNMP tried to add an inbound filter
and the inbound filter table is full.
Filter is not added to filter table.
Error returned to SNMP.

F509.4

IP Filters. Failed to add IP Filter. Cannot
allocate memory for entry.

1 (Emerg)

SNMP tried to add an inbound IP
filter and bridge could not allocate
memory to store the filter. Filter not
stored. Error returned to SNMP.
Contact your vendor.

F509.5

IP Filters. Failed to add IP Filter.
Outbound filter table full.

4 (Error)

SNMP tried to add an outbound filter
and the outbound filter table is full.
Filter is not added to filter table.
Error returned to SNMP.

Summary of Contents for SB5100 - SURFboard - 38 Mbps Cable Modem





































































































Search results

Summary of Contents for SB5100 - SURFboard - 38 Mbps Cable Modem

Reviews:

Related manuals for SB5100 - SURFboard - 38 Mbps Cable Modem

Brands by name

Popular brands

Motorola SB5100 - SURFboard - 38 Mbps Cable Modem, Installation Manual

Search results

Summary of Contents for SB5100 - SURFboard - 38 Mbps Cable Modem

Reviews:

Related manuals for SB5100 - SURFboard - 38 Mbps Cable Modem

Brands by name

Popular brands