B-24 Event
Log
Messages
SURFboard Cable Modem Installation Manual
Code
Event Log Messages
Level
Cable Modem Actions
X501.15
Unit Update: Could not write Bootrom to
flash..
2(Alert)
Update failed. System could not write
the new bootrom to flash. Try
operation again. If problem persists,
contact your vendor.
X501.16
Unable to start TFTP of software update
image. Out of resources.
4(Error)
Continue using current image. CM
was unable to transfer the new image
from the server. Check for network
problems, that file exists, that
docsDevSwServer is the correct
address of the Software Server and
retry the operation.
X501.17
Unable to retrieve software image. TFTP
failed. Select timed out.
4(Error)
Continue using current image. CM
was unable to transfer the new image
from the server. Check for network
problems, that file exists, that
docsDevSwServer is the correct
address of the Software Server and
retry the operation
X501.18
Unit Update, Unable to allocate memory
for image.
2(Alert)
Continue using current image. Update
failed. CM is out of memory. Try
rebooting CM. If problem persists
contact your vendor.
X501.19
Unit Update – TFTP of image failed.
4(Error)
Continue using current image. CM
was unable to transfer the new image
from the server. Check for network
problems, that file exists, that
docsDevSwServer is the correct
address of the Software Server and
retry the operation.
X501.20
Unit Update, Unable to allocate memory
for Bootrom image.
2(Alert)
Continue using current image. Update
failed. CM is out of memory. Try
rebooting CM. If problem persists
contact your vendor.
X501.21
Unit Update – Error retrieving image file.
4(Error)
Continue using current image. CM
was unable to transfer the new image
from the server. Check for network
problems, that file exists, that
docsDevSwServer is the correct
address of the Software Server and
retry the operation.
X501.22
Unit Update – Read wrong number of
bytes for Bootrom.
4(Error)
Continue using current image. Update
failed. The image file is most likely
corrupt. Obtain a new copy of the
image file.
X501.23
Unit Update failure. No data read from
file.
4(Error)
Continue using current image. CM
was unable to transfer the new image
from the server or the image is
corrupt. Check for network problems,
that file exists, that docsDevSwServer
is the correct address of the Software
Server and retry the operation. Obtain
a new copy of the image file.
Summary of Contents for SB5100 - SURFboard - 38 Mbps Cable Modem
Page 100: ...501652 001 01 03 MGBI ...
