Motorola SB5100 - SURFboard - 38 Mbps Cable Modem Installation Manual Download

Page: 78 / 100

B-6 Event

Log

Messages

SURFboard Cable Modem Installation Manual

UCC-RSP Upstream Channel Change Response

Code

Event Log Messages

Level

Cable Modem Actions

C100.0

UCC-RSP Upstream Channel Change
Response

7 (Info)

No action taken

C101.0

UCC-RSP not received on previous
channel ID.

C102.0

UCC-RSP received with invalid channel
ID.

C103.0

UCC-RSP received with invalid channel
ID on new channel.

DHCP CM Net Configuration Download and Time of Day

Code

Event Log Messages

Level

Cable Modem Actions

D00.0

DHCP CM Net Configuration download
and Time of Day

7 (Info)

No action taken

D01.0

Discover sent no Offer received, No
available DHCP Server.

4 (Error)

D02.0

Request sent, no Response.

4 (Error)

D03.0

Requested Info not supported.

4 (Error)

D03.1

DHCP response doesn't contain ALL the
valid fields as described in the RF spec

4 (Error)

D04.0

Time of Day, none set or invalid data.

D04.1

Time of Day Request sent no Response
received

5 (Warn) CM will time out in 10 secs and retry 2

time. If still fails, ignore it

D04.2

Time of Day Response received but
invalid data/format.

5 (Warn) CM will time out in 10 secs and retry 2

time. If still fails, ignore it

D05.0

TFTP Request sent, No Response/No
Server.

1 (Alert)

CM will keep retrying 3 times. If
unsuccessful, reset the board and
acquire the same frequency.

If still failed after 3 attempts, again, reset
the board 2

time and try to acquire the

frequency in memory.

If still failed after 3 attempts, reset the
board 3

time and try to scan the next

frequency in the frequency plan. The
board will eventually reboot due to
incomplete registration

Notes: To avoid repeated retrying, type
“clrscanflag” and reset the board. It will
acquire the current frequency over and
over when 3 TFTP attempts are failed

D06.0

TFTP Request Failed, configuration file
NOT FOUND.

1 (Alert)

D07.0

TFTP Failed, OUT OF ORDER packets.

Summary of Contents for SB5100 - SURFboard - 38 Mbps Cable Modem





































































































Search results

Summary of Contents for SB5100 - SURFboard - 38 Mbps Cable Modem

Reviews:

Related manuals for SB5100 - SURFboard - 38 Mbps Cable Modem

Brands by name

Popular brands

Motorola SB5100 - SURFboard - 38 Mbps Cable Modem, Installation Manual

Search results

Summary of Contents for SB5100 - SURFboard - 38 Mbps Cable Modem

Reviews:

Related manuals for SB5100 - SURFboard - 38 Mbps Cable Modem

Brands by name

Popular brands