4-26
Setup and Operation
PORT Menu
⎯
Setting Receive Multicast IP Addresses (Logical Ethernet Input Ports Only)
Each logical Ethernet input port receives data that is sent to the OM 1000 as either singlecast
or broadcast packets. In addition, each Ethernet input port can receive data that is sent to it as
multicast data. Up to five multicast host IP addresses can be set up for each logical Ethernet
input port. Figure 4-16 illustrates setting the logical Ethernet input port multicast receive IP
address:
Figure 4-16
Setting up logical Ethernet input port multicast receive IP addresses
Main menu
Port
selection
PORT
Port (logical)
setup
menu
Port
mode
Port
selection
Physical
interface
Operation
state
1
through
16
SRC-UDP
port #
ULCKD
LCKD
To PIDTBL
config menu
OFF
OUT
IN
Back to
main menu
To Multicast
receive menu
(disabled if not IN)
UP
PIDTBL
Active only if
changes are
made to Port
configuration
MORE
XXXXX
1-5
Back to Port
setup menu
224.000.000.000
to
239.255.255.255
RCV-IP#
Multicast
receive
menu
UP
COMMIT
To set up the multicast IP host addresses for a logical Ethernet input port:
1
Select the
PORT option
on the MAIN menu.
2
Select a
logical Ethernet input port
(1 through 16) at the PORT ## prompt.
OM 1000 Installation and Operation Manual