C-10
Initialization Information
OM1000.INI*
OM-1000 Dynamic Database Configuration.
OM1000.MSG
OM-1000 Message Queue Configuration.
OM1000.SNM*
OM-1000 Service Names. Used by the ACC-4000D.
OM1000.SVC*
Services
file.
OM1000.TSK
OM-1000 Task Configuration.
The following gives more detail about the files shown above that may require site specific
configuration.
OM
FO
The file name and path for the unit specific om1
1000.
F
000.ini file
must be set. Make no other changes. Example:
c:
di
00
4.000/om001.ini
/confi
/boot
r/om10
/03_0
g/config.ini
---------
OM
GT
The IP address and host name any network gateways to be used
1000.
W
by
the OM-1000 must be entered. Format is shown in the file's
header.
OM
HS
The OM-1000 requires IP address and host name for the associa
1000.
T
ted
control device (usually an ACC-4000D) to be present in this
file. Format is shown in the file's header.
OM
IN
The Emergency Alert Broadcast Port must be speci
1000.
I
fied. This is
the OM-1000 logical port used for EA. Example:
[Emergency
Broadcast
Port]
EBSLogicalPort
=
3;
-
where: 3 is the logical port number that the emergency
broadcast
PID
is
expected.
The Emergency Alert Broadcast PIDs must be specified. Example:
[Emergency Broadcast PID to Block]
EBSPidToBlock
=
5379;
[Emergency Broadcast PID to Block]
EBSPidToBlock2
=
5372;
.
.
.
----
wh
5379 (1503 hex) is the emergency broadcast PID.
ere:
If less than 4 PIDs are to be blocked, put in
-1 for the remaining field(s).
If the Multicast Receive capability is to be activated, the
Multicast Receive MAC address must be specified. Example:
[Physical
Port
Configuration]
PhysicalTable
=
#Group
1
2 0 0 0 0 0 0 0 0 0 0 0 0
#Group
2
OM 1000 Installation and Operation Manual