Setup and Operation
4-29
5
Select
MPEG/UDP
and enter the desired number of MPEG packets per UDP packet to be
transmitted.
6
After all changes are made, select
UP
to return to the logical Ethernet output port menu.
7
Select
COMMIT
to commit all changes to the OM 1000 database. To save the changes to
flash memory, select
SAVE
from the ADMIN menu. The OM 1000 must be rebooted for
these changes to take effect.
Figure 4-19
Logical Ethernet output port menu
A
B
C
E
F
H
G
D
Table 4-14 describes the fields and available options:
Table 4-14
Logical Ethernet output port menu options
Key Field
Options
Description
A
PORT nn
1
through
16
Sets the logical output port.
B
INTFC
0
1
2
3
4
5
6
7
Selects the physical input port.
NOT USED
CONSOLE
RS232_9
ETHERNET
UNEQPD or RS530 or RS232-25 (hardware configuration dependent)
UNEQPD or RS530 or RS232-25 (hardware configuration dependent)
MOD
PID GEN
C
LCKD
UNLCKD
Sets the port to the locked (disabled) or unlocked (enabled) position.
D
OFF
IN
OUT
Selects the port mode.
Select IN to configure a port to receive data.
Select OUT to configure a port to transmit data.
E
UP
Displays the previous menu.
F
MORE
Displays the logical Ethernet destination IP address menu.
G
DST-UDP
Sets the destination UDP port number.
OM 1000 Installation and Operation Manual