1-2
Introduction
Using this Manual
The following sections provide information and instructions to install, configure, and operate the
OM 1000:
Section 1
Introduction
provides a product description, related documentation, the technical helpline,
and repair/return information.
Section 2
Overview
describes functions of the OM 1000.
Section 3
Installation
provides instructions on how to install the OM 1000.
Section 4
Setup and Operation
provides instructions on how to set up and operate the OM 1000.
Section 5
Troubleshooting
provides problem solving, testing, and maintenance information.
Appendix A
Specifications
provides the technical specifications for the OM 1000.
Appendix B
Cabling Specifications
provides cabling requirements.
Appendix C
Initialization Information
provides special information on the OM 1000 initialization
process, such as BOOTP.
Glossary
The
Glossary
provides the full spelling of abbreviations and acronyms and definitions of the
special terms used in this manual.
Related Documentation
Although these documents provide information that may be of interest to you, they are not
required to install or operate the OM 1000:
C6U Commander 6
®
Upconverter Installation Manual
HCT 1000 Headend Configuration Tool (HCT) User Guide
Document Conventions
Before you begin using the OM 1000, familiarize yourself with the stylistic conventions used in
this manual:
SMALL CAPS
Denotes silk screening on the equipment, typically representing front and rear-panel
controls, input/output (I/O) connections, and LEDs
*
(asterisk)
Indicates that several versions of the same model number exist and the information
applies to all models; when the information applies to a specific model, the complete
model number is given
Italic type
Used for emphasis
Courier font
Displayed text
Bold
Indicates text you must type exactly as it appears, a selection item, or a default value.
OM 1000 Installation and Operation Manual