5.4 Configuring the Device to Use a Static IP Address
Procedure Steps
1
In the network dialog box, touch a network.
2
Touch
Show advanced options
checkbox.
3
Touch
Proxy settings
and select
Manual
.
Figure 5-2
Proxy Settings
4
In the
Proxy hostname
text box, enter the address of the proxy server.
5
In the
Proxy port
text box, enter the port number for the proxy server.
When entering proxy addresses the
Bypass proxy for
field, do not use spaces or carriage returns between
addresses.
6
In the
Bypass proxy for
text box, enter addresses for web sites that do not require to go through the proxy
server. Use the separator “|” between addresses.
7
Touch
Connect
.
8
Touch
.
5.4 Configuring the Device to Use a Static IP Address
By default, the device is configured to use Dynamic Host Configuration Protocol (DHCP) to assign an Internet
protocol (IP) address when connecting to a wireless network. To configure the device to connect to a network
using a static IP address:
MN000112A01 - September 2013
5-5