MC40 Integrator Guide
4.6.5.2 Using IP Output without IPWedge
IP Output Plug-in can be used to send captured data from
DataWedge
to a remote device or host computer without
using
IPWedge
. At the data receiving end, the host computer or mobile device should have an application, that
listens to TCP or UDP data coming from a configured port and IP address in the IP Output plug-in. To enable IP
Output to send captured data to a remote computer:
Procedure Steps
1
In
IP Output
, touch
Enabled
.
Step result:
A check appears in the checkbox.
2
Ensure
Remote Wedge
option is disabled.
3
Touch
Protocol
.
4
In the
Choose protocol
dialog box, touch the same protocol selected in the client application. (TCP is the
default).
Figure 4-12
Protocol Selection
5
Touch
IP Address
.
6
In the
Enter IP address
dialog box, enter the IP address of host computer to send data to.
Figure 4-13
IP Address Entry
7
Touch
Port
.
4-24
MN000112A01 - September 2013