4.6.5.1 Using IP Output with IPWedge
4
In the
Choose protocol
dialog box, touch the same protocol selected for the
IPWedge
computer application.
(TCP is the default).
Figure 4-9
Protocol Selection
5
Touch
IP Address
.
6
In the
Enter IP Address
dialog box, enter the IP address of host computer to send data to.
Figure 4-10
IP Address Entry
7
Touch
Port
.
8
In the
Enter port number
dialog box, enter same port number selected for
IPWedge
computer application.
Figure 4-11
Port Number Entry
9
Configure
Advanced data formatting
and
Basic data formatting
Plug-in if any required modification to be
done to captured data before sending to remote computer.
MN000112A01 - September 2013
4-23