5.2 Manually Adding a Wi-Fi Network
5.2 Manually Adding a Wi-Fi Network
Manually add a Wi-Fi network if the network does not broadcast its name (SSID) or to add a Wi-Fi network
when out of range.
Procedure Steps
1
Touch
.
2
Touch
Wi-Fi
.
3
Slide the Wi-Fi switch to the
On
position.
4
Touch
+
at the bottom of the screen.
5
In the
Network SSID
text box, enter the name of the Wi-Fi network.
6
In the
Security
drop-down list, select the type of security. Options:
•
None
•
WEP
•
WPA/WPA2 PSK
•
802.1x EAP
.
7
If the network security is
None
, touch
Save
.
8
If the network security is
WEP
or
WPA/WPA2 PSK
, enter the required password and then touch
Save
.
9
If the network security is
802.1x EAP
:
• Touch the
EAP method
drop-down list and select
PEAP
,
TLS
or
TTLS
.
• Touch the
Phase 2 authentication
drop-down list and select an authentication method.
• If required, touch
CA certificate
and select a Certification Authority (CA) certificate. Note: Certificates
are installed using the
Security
settings.
• If required, touch
User certificate
and select a user certificate. Note: User certificates are installed
using the
Security
settings.
•
If required, in the
Identity
text box, enter the username credentials.
• If desired, in the
Anonymous
identity text box, enter an anonymous identity username.
• If required, in the
Password
text box, enter the password for then given identity.
MN000112A01 - September 2013
5-3