Motorola MC40 Integrator Manual Download Page 29

Page: 29 / 203

Accessories

This chapter provides information for using the accessories for the device.

2.1 MC40 Accessories

Table 2-1

lists the accessories available for the MC40.

Table 2-1

MC40 Accessories

Accessory

Part Number

Description

Cradles

Single Slot
Charge Only
Cradle

CRDMC40XX-1000R

Charges the MC40.

Five Slot Charge
Only Cradle
Base

CRDUNIV-XX-5000R

Provides charging for up to five MC40 devices or four MC40
devices and one Four Slot Battery Charger using optional
Charging Cups. Requires additional power supplies.

Five Slot Charge
Only Cradle

CRDUNIV-40-5000R

Provides charging for up to five MC40 devices.

Chargers

Four Slot
Battery Charger

SACMC40XX-4000R

Charges up to four MC40 batteries.

Power Supply

PWRS-124306-01R

Provides power to the MC40 and Single Slot Charge Cradle.

Power Supply
(12 VDC, 4.16
A)

PWRS-14000-148C

Provides power to the Five Slot Charge Only Cradle and the
Four Slot Battery Charger.

Cables

Micro USB
Cable

25-MCXUSB-01R

Provides power to the MC40 and USB communication with
a host computer.

US AC Line
Cord (3-wire)

23844-00-00R

Provides power to the power supplies.

2-way DC Cable

25-122026-02R

Connects one power supply (PWRS-14000-148C) to two Four
Slot Battery Chargers.

4-way DC Cable

25-85992-01R

Connects one power supply (PWRS-14000-241R) to four Four
Slot Battery Chargers.

Miscellaneous

Spare 2680 mAh
lithium-ion
battery

BTRY-MC40EAB0E

BTRY-MC40EAB0E-10R

Replacement 2680 mAh battery.

Replacement 2680 mAh battery (10-pack)

MN000112A01 - September 2013

2-1

Summary of Contents for MC40












































































































































































































Search results

Summary of Contents for MC40

Reviews:

Motorola MC40, Integrator Manual, Page: 29 / 203

Search results

Summary of Contents for MC40

Reviews: