–
Enable
- Enables decoding of only inverse 1D bar codes.
–
Auto
- Allows decoding of both twice positive and inverse 1D bar codes.
•
Viewfinder Mode
- Configures the Viewfinder modes supported for camera scanning.
–
Viewfinder Enabled
- Enables only the viewfinder.
–
Static Reticle
- Enables the viewfinder and a red reticle in the center of the screen which helps selecting
the bar code (default).
Scan Params
Allows the configuration of Code ID and decode feedback options.
•
Code ID Type
- A Code ID character identifies the code type of a scanned bar code. This is useful when the
reader is decoding more than one code type. Select a code ID character to insert between the prefix and the
decoded symbol.
–
Code ID Type None
- No prefix (default).
–
Code ID Type Aim
- A standards based three character prefix.
–
Code ID Type Symbol
- A Symbol defined single character prefix.
Not all ringtones are fully supported as decode tones and those of longer length may be truncated
when used as a decode tone. The recommendation is to test the selected tone for operation before
deployment to a customer site.
•
Decode Audio Feedback
- Select an audio tone to sound upon a good decode.
•
Decode Haptic Feedback
- Enable the device to vibrate upon a good decode (default - enabled).
4.6.2 MSR Input
Use
MSR Input
options to configure the MSR Input Plug-in for the profile.
•
Enabled
— Enables or disables this plug-in. A check in the checkbox indicates that the plug-in is enabled.
4.6.3 Keystroke Output
Use to configure the Keystroke Output Plug-in for the profile.
•
Enabled
— Enables or disables this plug-in. A check in the checkbox indicates that the plug-in is enabled
(default - enabled).
•
Action key character
- Enables decoding of a special character embedded within a bar code or MSR data for use
in native Android applications. This feature is helpful when populating or executing a form.
–
None
- Action key character feature is disabled (default).
–
Tab
- Tab character code in a bar code is processed. When DataWedge detects this character code in a bar
code, move the focus to the next field.
–
Line feed
- Line feed character code in a bar code is processed. When DataWedge detects this character
code in a bar code, move the focus to the next field.
MN000112A01 - September 2013
4-17