Motorola i760, Field Service Manual

Page: 60 / 112

BASIC LEVEL TEST MODES AND PROCEDURES: Technician Test Procedures
6-8
68P80400P94-O
31. Press
Back
to return to the
Trace Mode
display.
32. Scroll down to highlight
Flags
, and then press
View
to view the
Flags
display. This screen
displays the error log, which contains any errors logged by the unit software.
33. Press
Back
to return to the
Trace Mode
display.
34. Scroll down to highlight
Coin Cell
, and then press
View
to show the Preset Charging Voltage on
line 1 and Current Battery Voltage on line 2.
35. Press
Back
to return to the
Trace Mode
display.
36. Scroll down to highlight
CE Status
, and then press
OK
to view accessory type connected to the
unit.
37. Press
Back
to return to the
Trace Mode
display.
6.3 Technician Test Procedures
Technician Tests usually require special equipment to test the functionality of the components in the
unit.
The following tests check the software functionality of the unit:
•
Codeplug Help
•
Codeplug Troubleshooting
6.4 Programming the i850/i760 Unit
Use Radio Service Software (RSS) to activate a new software utility or to program specific codeplug
user information.
Refer to Radio Service Software’s Help Menu, iDEN Service Bulletins, the Motorola iDEN website,
or contact iDEN Customer Care for information on the setup and use of RSS.
NOTE: iDEN Service Bulletins, Software Utilities, and Updates can be found online at:
http://idenphones.motorola.com/iden/support/
6.5 Connecting the Unit to the RSS Workstation
Some technician tests enter programming information into the unit. To perform these tests, the unit
must be correctly connected to the test equipment.
Recommended equipment: RS232 data cable(NKN6560A) or USB data cable(NKN6559A) and a
PC computer workstation with RSS installed.
NOTE:
For a list of recommended programming equipment, applicable part numbers, and
descriptions, refer to Appendix A: Ordering Replacement Parts and Kits.