Motorola i760, Field Service Manual

Page: 58 / 112

BASIC LEVEL TEST MODES AND PROCEDURES: Test Mode Test Procedures
6-6
68P80400P94-O
f. Press
Back
to return to the
Unit Info
display, and then scroll down to highlight the
Software
choice.
g. Press
Select
to view the current software version programmed in the unit, as well as the
software type (RSS model) and build date.
3. Press
Back
twice to return to the
Trace Mode
display.
4. Scroll down to highlight
Total Usage
, and then press
View
to view the
Total Usage
display.
This screen displays the number of minutes the unit has used a traffic (dispatch and
interconnect) or a Packet Data channel since manufacture.
5. Press
Back
to return to the
Trace Mode
display.
6. Scroll down to highlight
Tx/Rx Status
, and then press
View
to view the
Tx/Rx Status
display.
The first line displays the SQE/Carrier data (outbound signal quality, frequency band, current
carrier code, and color code). The second line displays the Tx/Rx power (current adjusted
transmit output power and receiver input power) of the unit. The third line displays the current
temperature and the difference between the current temperature and the temperature two
seconds ago.
7. Press
Back
to return to the
Trace Mode
display.
8. Scroll down to highlight
N6: Intrcnct
, then press
OK
to view parameter details related to
RF-originated messages.
9. Press
Back
to return to the
Trace Mode
display.
10. Scroll down to
N6: Dispatch
, then press
OK
to view the newest dispatch data.
11. Press
Back
to return to the
Trace Mode
display.
12. Scroll down to highlight
GPS
, and then press
View
to view the
GPS
display.
a.
Location
selection displays the number of satellites used to obtain the position fix, the
current cell site latitude and longitude, the subscriber unit latitude and altitude information,
as well as the last calculated horizontal and vertical accuracy.
b.
Time
selection contains iDEN time information used to determine accurate GPS time.
c.
Assist
selection contains the subscriber unit latitude, longitude and horizontal accuracy in
meters as well as an indication of whether the data is valid or not.
d.
Navigation
selection contains the heading as well as velocity and velocity error in
kilometers/hour.
e.
Summary
selection contains time and longitude/latitude expressed in degrees. Accuracy in
meters is also displayed.
f.
GPS Version
contains information about the custom Sirf software used in the unit.
13. Press
Back
to return to the
Trace Mode
display.