manualshive.com logo in svg

Motorola i760, Field Service Manual

Share
Download
Motorola i760 Field Service Manual Download Page 13

68P80400P94-O

xiii

PREFACE

The iDEN i850/i760 Digital Multi-Service, Data-Capable Portable Field Service Manual contains 
the information necessary to identify and fix problems in the Motorola i850/i760 Digital Portable. 
This unit is based on digital technology and is designed to operate on iDEN systems.

Basic and field-level service for the this unit as described in this manual includes troubleshooting, 
testing, board swapping, and maintenance.

Service for this unit is based on the substitution method: a faulty part is replaced by a working one, 
providing quicker service to the customer. For example, if the battery is faulty, it is replaced. If the 
unit requires more complete testing or service than is available at the basic level, it is sent to the 
field-level service facility, serviced, and returned to the iDEN Customer Care Center (ICC).

NOTE:

Before operating or testing this unit, please read the 

Safety and General Information

 

section in the front of this manual.

1.1

Who Should Use This Manual

This manual is intended for service technicians who should be familiar with the test equipment 
recommended in Appendix A. To help pinpoint basic problems with the unit, first perform the 
mechanical checks and self tests as described in Chapter 5; then proceed to field level 
troubleshooting and testing.

1.2

How This Manual Is Organized

This manual contains the following chapters and appendices:

Chapter 1

 presents the theory and technology used by the iDEN system and the unit.

Chapter 2

 describes the unit’s features, icons, and indicators.

Chapter 3

 describes displays, messages, and alerts.

Chapter 4

 describes preparing for basic level testing.

Chapter 5

 describes basic mechanical checks and self test procedures to be performed.

Chapter 6 

describes basic test modes and technician test procedures.

Chapter 7

 describes how to prepare and operate field level test equipment. It also contains 

disassembly and reassembly instructions. 

Chapter 8 

describes field level test modes and procedures.

Chapter 9 

describes large component repair and rework procedures.

Summary of Contents for i760

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands