Motorola i760, Field Service Manual

Page: 43 / 112

BASIC LEVEL CHECKS AND SELF TESTS: Mechanical and Electrical Checks
68P80400P94-O
5-5
5.5.4 Battery Connections Test
Use this test to check the battery connections in the unit.
The Battery Connections test time is approximately 5 minutes:
1. Remove the battery cover and battery from the unit.
2. Inspect the battery for physical damage.
If damage is evident, replace the battery.
3. Insert and remove the battery several times to check the battery connections and back plate of
the unit.
If either components are damaged, replace the unit.
4. Check the battery contacts for foreign material. Use a gold contact cleaning pen (see Appendix
A: Ordering Replacement Parts & Kits for part number) to clean the contact area on the battery.
5. Check the battery cover to ensure it fits and attaches properly to the back of the unit. Replace, if
necessary.
6. Use a pencil or similar object to depress the battery contacts. They should spring back to their
original position.
If the battery contacts do not spring back, they are damaged. Replace the unit.
5.5.5 Testing the GPS Receiver
The GPS receiver does not require alignment. The functionality of the receiver can be checked using
the autonomous mode feature.
Equipment Required: A known good i850/i760 unit, or a commercial GPS receiver.
To test the GPS Receiver:
1. Move the unit to an open sky area, preferably outside—away from tall buildings and foliage.
2. With the unit turned on, press Menu.
3. Scroll until the
GPS
menu option is highlighted.
4. Press SELECT.
5. Scroll down on the
GPS
menu until the “POSITION” option is selected.
6. Press SELECT. The unit will display a “Position” information sheet.
F
CAUTION: Do not use a pencil eraser or similar material to clean the contacts.
If you do, damage can occur to the contacts.