Motorola CB3000 - Client Bridge - Wireless Access Point User Manual Download Page 31

Page: 31 / 106

Network Configuration

3-7

Figure 3.3 Set Data Rates (for Ad Hoc Configured Devices Only)

Select at least one

Basic Rate

as a minimum transmit rate value for the CB3000 radio. Within the

Supported Rates

, select the data rate the CB3000 radio defaults to if a higher selected data rate cannot

be maintained.

5. Click

Apply

to apply and save the settings, or

Cancel

to exit the screen without saving your changes.

To configure the CB3000 into an Infrastructure network instead, see

Configuring Infrastructure Settings on

page 3-3

NOTE:

Select supported rates in respect to the data rates supported by the peer

devices within the ad hoc network. For example, if several of the peers within the
network are 802.11b clients, supported data rates should include 11 Mbps,
5.5 Mbps, 2 Mbps and 1 Mbps.

Summary of Contents for CB3000 - Client Bridge - Wireless Access Point











































































































Search results

Summary of Contents for CB3000 - Client Bridge - Wireless Access Point

Reviews:

Related manuals for CB3000 - Client Bridge - Wireless Access Point

Brands by name

Popular brands

Motorola CB3000 - Client Bridge - Wireless Access Point, User Manual

Search results

Summary of Contents for CB3000 - Client Bridge - Wireless Access Point

Reviews:

Related manuals for CB3000 - Client Bridge - Wireless Access Point

Brands by name

Popular brands