Management Options
4-11
Figure 4.7 SNMP Access Control
2. Select the
Enable SNMP Access
checkbox to enable/disable the CB3000 SNMP interface
3. Enter a 4-32 character string for read-only SNMP permissions in the
Read Only
field. The default is
"
public
".
4. Enter a 4-32 character string for read/write SNMP permissions in the
Read Write
field. The default is
"
private
".
5. Enter Start IP and End IP addresses to specify a range of users that can access the CB3000 SNMP
interface. Use just the
Start IP Address
field to specify a single SNMP user. To leave access
unrestricted, do not enter an IP address.
For additional access control, an SNMP-capable client can be set up whereby only the administrator can
use a read/write community definition.
6. Click
Add
to add the specified IP address(es).
Once added, those IP addresses with an allowed designation display within the
Allowed IP Addresses
table.
Summary of Contents for CB3000 - Client Bridge - Wireless Access Point
