Motorola CB3000 - Client Bridge - Wireless Access Point, User Manual

Page: 16 / 106

2-4 CB3000 Client Bridge User’s Guide
2.5 Logging into the CB3000
There are two ways to log into the CB3000 console:
• Using the CB3000 Discovery Tool included on the CB3000 product CD
• Using a Web browser such as Microsoft Internet Explorer 5.0 or later, or Mozilla Firefox 2.0 or later, or
Netscape Navigator 6.0 or later.
Typically, the CB3000 is located using the Discovery Tool. The discovered CB3000’s URL is then saved as a
browser “favorite” and the saved link is used to access the console directly through a Web browser.
2.5.1 Discovery Tool Login
Included on the CB3000 Client Bridge CD is a utility called the Discovery Tool. When executed, the Discovery
Tool scans the network for all running CB3000 units and “discovers” them. When a unit is discovered, it is
listed within the Discovery Tool interface. By selecting a discovered unit within the Discovery Tool, you can
log into its console.
Table 2-1. CB3000 LEDs
LED Label Activity Description
Power LEDs
Status OFF Power OFF
Error Orange ON Hardware error
Status Green ON Power ON/Device ready
Status Green Blinking Booting, system self-test or firmware upgrade
Radio LEDs
802.11a, 802.11b/g OFF Connectivity disabled
802.11a Orange ON 802.11a radio associated
802.11a Orange Blinking 802.11 a radio scanning
802.11b/g Green ON 802.11b/g radio associated
802.11b/g Green Blinking 802.11b/g radio scanning
LAN LEDs
100 Mbps, 10 Mbps OFF No Ethernet activity
100 Mbps Orange ON 100 Mbps connection over LAN
100 Mbps Orange Blinking 100 Mbps transmit/receive
10 Mbps Green ON 10 Mbps connection over LAN
10 Mbps Green Blinking 10 Mbps transmit/receive
NOTE: If you use the Discover Tool to connect to a CB3000, the session is opened
using https.