Motorola Astro XTL 1500 User Manual Download

Page: 11 / 120

ASTRO XTL 1500 Digital Mobile Radio with Control Head

Notations Used in This Manual

Throughout the text in this publication, you will notice the use of WARNINGS,
CAUTIONS, and Notes. These notations are used to emphasize that safety
hazards exist, and care that must be taken or observed.

The following special notations identify certain items:

WARNING: An operational procedure, practice, or other
condition, which might result in injury or death if not carefully
observed.

CAUTION: An operational procedure, practice, or other
condition, which might result in damage to the equipment if not
carefully observed.

Note:

Note: An operational procedure, practice, or other condition,
which is essential to emphasize.

Example

Description

Orange button or

Buttons and keys are shown in bold print or as a key
symbol.

The special display font is used to show information in
the display.

PHON

Menu items (softkeys) are similar to the way they
appear on the radio’s display.

WARNING

CAUTION

Summary of Contents for Astro XTL 1500

























































































































Search results

Summary of Contents for Astro XTL 1500

Reviews:

Related manuals for Astro XTL 1500

Brands by name

Popular brands

Motorola Astro XTL 1500, User Manual

Search results

Summary of Contents for Astro XTL 1500

Reviews:

Related manuals for Astro XTL 1500

Brands by name

Popular brands