Motorola Astro XTL 1500 User Manual Download

Page: 77 / 120

ASTRO XTL 1500 Digital Mobile Radio with Control Head

Trunking Features

Entering Directly the ID Number to Be Called

You can use the keypad to directly enter the ID number of the person
you want to call. Follow these steps to enter the ID directly:

For Private Conversation, press the

button to scroll to the

CALL

softkey.

The display shows the last ID number
transmitted or received.

Use the keypad to enter the new ID
number.

Notes:

If you enter more than, or less than, six digits and press the

PTT

button, you will hear a bad key-press tone.

Press the

button to move the cursor to the left and

erase the previous digit. When you have erased the last
digit, press the

button to display the last entry in the list.

Press the

button to display the first list entry.

LIST

Summary of Contents for Astro XTL 1500

























































































































Search results

Summary of Contents for Astro XTL 1500

Reviews:

Related manuals for Astro XTL 1500

Brands by name

Popular brands

Motorola Astro XTL 1500, User Manual

Search results

Summary of Contents for Astro XTL 1500

Reviews:

Related manuals for Astro XTL 1500

Brands by name

Popular brands