Motorola Astro XTL 1500 User Manual Download

Page: 48 / 120

Common Radio Features

Turning Scan On or Off

Deleting Nuisance Modes

During scanning, you can temporarily delete modes you do not want to
hear. This feature must be preprogrammed by your system manager.

Follow these steps to delete a nuisance mode:

Press

below

SCAN

Alternatively press the preprogrammed

Scan

button.

The display shows

SCAN ON

previously

SCAN OFF

was selected

and the scan indicator is turned on.

The display shows

SCAN OFF

if previously

SCAN ON

was selected and the scan

indicator is turned off

When the radio is locked onto the mode you want to delete,
Press the preprogrammed

Nuisance Delete

button.

Press the

NUIS

softkey to delete the mode.

A valid key-press chirp tone sounds. The mode is deleted and
the radio continues to scan the remaining modes.

Note:

You cannot delete priority modes and the designated
transmit channel.

To resume scanning the deleted mode, press scan off and then
back on again.

Turn power off and then back on again.

SCAN

Summary of Contents for Astro XTL 1500

























































































































Search results

Summary of Contents for Astro XTL 1500

Reviews:

Related manuals for Astro XTL 1500

Brands by name

Popular brands

Motorola Astro XTL 1500, User Manual

Search results

Summary of Contents for Astro XTL 1500

Reviews:

Related manuals for Astro XTL 1500

Brands by name

Popular brands