Motorola Astro XTL 1500 User Manual Download

Page: 67 / 120

ASTRO XTL 1500 Digital Mobile Radio with Control Head

Conventional Features

Starting a Selective Call

Follow the steps below to initiate a Selective Call:

Press the numeric keys to enter the second digit of the location
number.

The member’s name and ID number are alternately displayed.

Note:

The display shows

INVALID

if you enter a nonexisting

number (for example, 24). The radio will revert back to step
3.

Press the

PTT

button.

The display shows the caller ID number and Zone channel.

The Call-Received status annunciator (

) flashes

Pause for one second for the alert tone to sound on the
receiving radio.

When the person you called answers, press the

PTT

button to

respond.

To hang up, press the

EXIT

softkey.

The radio returns to the home display.

Summary of Contents for Astro XTL 1500

























































































































Search results

Summary of Contents for Astro XTL 1500

Reviews:

Related manuals for Astro XTL 1500

Brands by name

Popular brands

Motorola Astro XTL 1500, User Manual

Search results

Summary of Contents for Astro XTL 1500

Reviews:

Related manuals for Astro XTL 1500

Brands by name

Popular brands