Motorola Astro XTL 1500 User Manual Download

Page: 26 / 120

Getting to Know Your Radio

Continuous, low-
pitched tone

Transmit on receive-only mode.
Pressed PTT button on receive-
only mode.

Release PTT
button.

Transmit inhibit on busy mode.
Pressed PTT button while mode
is busy.

Invalid mode. An invalid or
unprogrammed operation.

Time-out timer timed out.
Transmission terminated.

Release PTT
button.

Continuous,
medium-pitched
tone

Emergency alarm/call exit.
Exiting.

Faint beeping
tone every ten
seconds (trunked
systems only)

Failsoft.

“Bah-bah-bah-
bah” (trunked
systems only)

Trunked system busy. Radio is in
queue.

Waiting for next
available mode.

Single, medium-
pitched tones
followed by group
of four medium-
pitched tones

Your page has been received by
the target radio.

Group of two
medium-pitched
tones

Private Conversation call
received.

Group of three
medium-pitched
(di-di-dit) tones
(trunked systems
only)

Call back. A talkgroup is now
available.

Okay to transmit
in that
talkgroup.

Type of Tone

Indicates...

Action

Summary of Contents for Astro XTL 1500

























































































































Search results

Summary of Contents for Astro XTL 1500

Reviews:

Related manuals for Astro XTL 1500

Brands by name

Popular brands

Motorola Astro XTL 1500, User Manual

Search results

Summary of Contents for Astro XTL 1500

Reviews:

Related manuals for Astro XTL 1500

Brands by name

Popular brands