Motorola Astro XTL 1500 User Manual Download

Page: 66 / 120

Conventional Features

Going Directly to an ID Number in the Call List

Press the

button below

CALL

The display shows the last ID number
transmitted or received.

Rotate the

Mode Knob

to scroll through the list.

Note:

The last member of the list equals the last ID number
transmitted or received. This is the same as location

the list.

Do the following:

• Press the numeric keys to enter the

first digit of the location number.

That position in the list is
immediately displayed only if there
are fewer than 10 members. The
member’s name and ID number are
alternately displayed.

•

If there are 10 or more members

LOC#X|

is displayed

(where

is a 0

or a 1 and it is the first digit entered).

The cursor flashes to show the
location of the second digit.

LIST

LNUM

Summary of Contents for Astro XTL 1500

























































































































Search results

Summary of Contents for Astro XTL 1500

Reviews:

Related manuals for Astro XTL 1500

Brands by name

Popular brands

Motorola Astro XTL 1500, User Manual

Search results

Summary of Contents for Astro XTL 1500

Reviews:

Related manuals for Astro XTL 1500

Brands by name

Popular brands