Motorola Astro XTL 1500 User Manual Download | Manualshive

Page: 109 / 120

background image

ASTRO XTL 1500 Digital Mobile Radio with Control Head

93

Commercial Warranty and Service

Product. The foregoing states the entire liability of MOTOROLA with
respect to infringement of patents by the Product or any parts thereof.

Laws in the United States and other countries preserve for
MOTOROLA certain exclusive rights for copyrighted MOTOROLA
software such as the exclusive rights to reproduce in copies and
distribute copies of such Motorola software. MOTOROLA software
may be used in only the Product in which the software was originally
embodied and such software in such Product may not be replaced,
copied, distributed, modified in any way, or used to produce any
derivative thereof. No other use including, without limitation,
alteration, modification, reproduction, distribution, or reverse
engineering of such MOTOROLA software or exercise of rights in
such MOTOROLA software is permitted. No license is granted by
implication, estoppel or otherwise under MOTOROLA patent rights or
copyrights.

VII. GOVERNING LAW:

This Warranty is governed by the laws of the State of Illinois, USA.

Service

Proper repair and maintenance procedures will assure efficient
operation and long life for this product. A Motorola maintenance
agreement will provide expert service to keep this and all other
communication equipment in perfect operating condition. A
nationwide service organization is provided by Motorola to support
maintenance services. Through its maintenance and installation
program, Motorola makes available the finest service to those
desiring reliable, continuous communications on a contract basis. For
a contract service agreement, please contact your nearest Motorola
service or sales representative, or an authorized Motorola dealer.

Express Service Plus (ESP) is an optional extended service coverage
plan, which provides for the repair of this product for a period of three
years from the date of shipment from the factory, or the date of
delivery if purchased from an authorized Motorola two-way radio
dealer. For more information about ESP, contact the Motorola Radio
Support Center, 2204 Galvin Drive, Elgin, IL 60123, 1-800-227-6772.

«
...
107
108
109
110
111
...
»

Summary of Contents for Astro XTL 1500

























































































































Reviews:

No comments

Related manuals for Astro XTL 1500

Xpress XMCK-20KC

Brand: Audiovox Pages: 2

Brand: E-Tech Pages: 19

Brand: Auriol Pages: 68

Brand: Sangean Pages: 1

Brand: Pure Digital Pages: 18

Brand: Audiovox Pages: 32

Brand: Cobra Marine Pages: 44

CC Solar Observer

Brand: C. Crane Pages: 16

Brand: Hyundai Pages: 9

GEONAUTE On channel 700

Brand: OXYLANE Pages: 244

Brand: GPX Pages: 2

Brand: JVC Pages: 32

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands