Motorola Astro XTL 1500 User Manual Download

Page: 36 / 120

Basic Radio Operation

Transmitting on Trunked Systems

Follow these steps to transmit on a trunked system:

Select a desired zone and mode (see page 17).

Note:

If no secure voice modes

are available for a transmission,
the display shows

NO SEC

You must switch to a clear mode or wait

until a secure voice channel is available before you can
transmit.

When you hear a transmission, use the

Volume Knob

to adjust

the volume to a comfortable listening level if necessary.

Press and hold the

PTT

button to transmit.

Speak clearly into the microphone.
The red LED lights steadily when the radio is transmitting.

Release the

PTT

button to receive.

Notes:

If you hear a busy (“bah-bah-bah-bah”) signal, release the

PTT

button. You hear a “di-di-dit” (“call-back”) tone. You

have three seconds to transmit before you hear another
busy signal.

If transmission is not possible for some reason, you hear a
continuous, low-pitched (“talk prohibit”) tone. Your radio may
be out of range.

Summary of Contents for Astro XTL 1500

























































































































Search results

Summary of Contents for Astro XTL 1500

Reviews:

Related manuals for Astro XTL 1500

Brands by name

Popular brands

Motorola Astro XTL 1500, User Manual

Search results

Summary of Contents for Astro XTL 1500

Reviews:

Related manuals for Astro XTL 1500

Brands by name

Popular brands