Motorola ASTRO APX 4000 3 User Manual Download

Page: 45 / 174

Identifying S

tatus Indicators

English

TMS Menu Options

Priority Status

•

The “Priority” feature is toggled on before the
message is sent.

•

Messages in the Inbox folder are flagged with
“Priority”.

Request Reply

•

The “Request Reply” feature is toggled on
before the message is sent.

•

Messages in the Inbox folder are flagged with
“Request Reply”.

Priority Status and Request Reply

•

User is composing a message with a priority
status and a request for a reply.

•

Messages in the Inbox folder are flagged with
“Priority” and “Request Reply”.

Menu Option

Description/Function

Back

Brings you back to the previous screen.

Clr

Deletes all messages.

Del

Deletes a message or text.

Edit

Brings you to the edit screen.

Exit

Exits to the Home screen.

Returns to the previous screen.

Optn

Brings you to the Options main screen.

Rply

Replies to a message.

Sel

Selects the highlighted command.

Send

Sends the message.

Yes

Updates or saves a command.



APX_4000_M3.book Page 25 Friday, May 31, 2013 12:41 PM

Summary of Contents for ASTRO APX 4000 3















































































































































































Search results

Summary of Contents for ASTRO APX 4000 3

Reviews:

Related manuals for ASTRO APX 4000 3

Brands by name

Popular brands

Motorola ASTRO APX 4000 3, User Manual

Search results

Summary of Contents for ASTRO APX 4000 3

Reviews:

Related manuals for ASTRO APX 4000 3

Brands by name

Popular brands