Motorola ASTRO APX 4000 3 User Manual Download

Page: 87 / 174

Advanced Features

English

Sending an Emergency Call (Trunking Only)

This feature gives your radio priority access on a channel.

Note:

The radio operates in the normal dispatch manner
while in Emergency Call, except, if enabled, it returns
to one of the following:

•

Tactical/Non-Revert

–

You talk on the channel you

selected before you entered the emergency state.

•

Non-Tactical/Revert

–

You talk on a

preprogrammed emergency channel. The

emergency alarm is sent on this same channel.

Procedure:

Press the preprogrammed

Emergency

button.

The display shows

Emergency

and the current zone or

channel. You hear a short, medium-pitched tone and the
LED blinks red momentarily.

The display shows

No emergency

, if the selected channel

does not support emergency.

Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.

Press and hold the

PTT

button. Speak clearly into the

microphone.

Release the

PTT

button to end the transmission and wait for

a response from the dispatcher.

Press and hold the preprogrammed

Emergency

button for

about a second to exit the Emergency Call mode.

Sending an Emergency Alarm with

Emergency

Call

Procedure:

Press the preprogrammed

Emergency

button.

The display shows

Emergency

and the current zone or

channel. You hear a short, medium-pitched tone and the
LED blinks red momentarily.

The display shows

No emergency

, if the selected channel

does not support emergency.

The radio enters the Emergency Call state when:
You receive the dispatcher’s acknowledgment. The display
shows

Ack received

You receive no acknowledgement. The display shows

No acknowledge

You press the

PTT

button while in the Emergency Alarm

mode.

Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.



APX_4000_M3.book Page 67 Friday, May 31, 2013 12:41 PM

Summary of Contents for ASTRO APX 4000 3















































































































































































Search results

Summary of Contents for ASTRO APX 4000 3

Reviews:

Related manuals for ASTRO APX 4000 3

Brands by name

Popular brands

Motorola ASTRO APX 4000 3, User Manual

Search results

Summary of Contents for ASTRO APX 4000 3

Reviews:

Related manuals for ASTRO APX 4000 3

Brands by name

Popular brands