Motorola ASTRO APX 4000 3 User Manual Download

Page: 78 / 174

Advanced Features

English

Editing a Contact in a Call List

Editing an Entry Alias

Procedure:

Cnts

Press the

Menu Select

button directly below

Cnts

. The

entries are alphabetically sorted.

to the entry you want to edit and press the

Menu

Select

button directly below

Optn

Edit

and press the

Menu Select

button directly

below

Sel

to the entry alias you wish to change and press the

Menu Select

button directly below

Edit

A blinking cursor appears.
Use the keypad to edit the name.
Press

to move one space to the left.

Press

to move one space to the right.

Press the

Menu Select

button directly below

Del

to delete

any unwanted characters.
Press

to add a space.

Press

to toggle between mixed case mode, uppercase

mode, and lowercase mode.
Press

to toggle between numeric and letter mode.

Press the

Menu Select

button directly below

once you

have finished. The display returns to the Edit Contact
screen.

Press the

Menu Select

button directly below

Done

to save

your changes and return to the main screen for Contacts.

Editing as Entry ID

Procedure:

Cnts

Press the

Menu Select

button directly below

Cnts

. The

entries are alphabetically sorted.

to the entry you want to edit and press the

Menu

Select

button directly below

Optn

Edit

and press the

Menu Select

button directly

below

Sel

to the entry ID you wish to change and press the

Menu Select

button directly below

Edit

A blinking cursor appears.
Use the keypad to edit the name.
Press

to move one space to the left.

Press

to move one space to the right.

Press the

Menu Select

button directly below

Del

to delete

any unwanted characters.
Press

to add a space.



APX_4000_M3.book Page 58 Friday, May 31, 2013 12:41 PM

Summary of Contents for ASTRO APX 4000 3















































































































































































Search results

Summary of Contents for ASTRO APX 4000 3

Reviews:

Related manuals for ASTRO APX 4000 3

Brands by name

Popular brands

Motorola ASTRO APX 4000 3, User Manual

Search results

Summary of Contents for ASTRO APX 4000 3

Reviews:

Related manuals for ASTRO APX 4000 3

Brands by name

Popular brands