Motorola ASTRO APX 4000 3 User Manual Download

Page: 44 / 174

Identifying S

tatus Indicators

English

Text Messaging Service (TMS) Icons

This feature allows you to send and receive text messages. See

Text Messaging Service (TMS)

on page 76 for more

information.

Status Icons

The following icons appear on the radio’s display when you
send and receive text messages.

Bluetooth Connected

Bluetooth is currently connected to the external
bluetooth device.

MFK is in Mode Change feature

Turn the MFK to change the channel/zone.

MFK is in Volume Change feature

Turn the MFK to turn the volume up or down.

Inbox Full

The Inbox is full.



Message Sent

The text message is sent successfully.

Message Unsent

The text message cannot be sent.

Unread Message

•

User receives a new message.

•

The selected text message in the Inbox has not
been read.

Read Message

The selected text message in the Inbox has been
read.

Normal Message

User is composing a message with normal priority
and without a request for a reply.

3/6

Message Index

Indicates the index of the current message the
user is viewing.
Example: If the user is looking at the third
message out of a total of 6 messages in the Inbox
folder, the icon is displayed as the icon on the left
column.

APX_4000_M3.book Page 24 Friday, May 31, 2013 12:41 PM

Summary of Contents for ASTRO APX 4000 3















































































































































































Search results

Summary of Contents for ASTRO APX 4000 3

Reviews:

Related manuals for ASTRO APX 4000 3

Brands by name

Popular brands

Motorola ASTRO APX 4000 3, User Manual

Search results

Summary of Contents for ASTRO APX 4000 3

Reviews:

Related manuals for ASTRO APX 4000 3

Brands by name

Popular brands